diff options
Diffstat (limited to 'linux-raveos/PKGBUILD')
| -rw-r--r-- | linux-raveos/PKGBUILD | 598 |
1 files changed, 598 insertions, 0 deletions
diff --git a/linux-raveos/PKGBUILD b/linux-raveos/PKGBUILD new file mode 100644 index 0000000..668c1e4 --- /dev/null +++ b/linux-raveos/PKGBUILD @@ -0,0 +1,598 @@ +# Maintainer: RaveOS Project +# Based on linux-cachyos by Peter Jung ptr1337 <admin@ptr1337.dev> + +### BUILD OPTIONS + +### Selecting CachyOS config +: "${_cachy_config:=yes}" + +### CPU scheduler - BORE (gaming/desktop optimized) +: "${_cpusched:=bore}" + +### Tweak kernel options prior to a build via nconfig +: "${_makenconfig:=no}" + +### Tweak kernel options prior to a build via xconfig +: "${_makexconfig:=no}" + +# Compile ONLY used modules to VASTLY reduce the number of modules built +: "${_localmodcfg:=no}" + +# Path to the list of used modules +: "${_localmodcfg_path:="$HOME/.config/modprobed.db"}" + +# Use the current kernel's .config file +: "${_use_current:=no}" + +### Enable KBUILD_CFLAGS -O3 +: "${_cc_harder:=yes}" + +### Set performance governor as default +: "${_per_gov:=no}" + +### Enable TCP_CONG_BBR3 +: "${_tcp_bbr3:=no}" + +### Running with 1000Hz tick rate (low latency desktop) +: "${_HZ_ticks:=1000}" + +## Full tickless for best desktop performance +: "${_tickrate:=full}" + +## Full preemption for lowest latency +: "${_preempt:=full}" + +### Transparent Hugepages - always (gaming/desktop memory performance) +: "${_hugepage:=always}" + +# CPU compiler optimizations +: "${_processor_opt:=}" + +# Clang LTO - thin (faster builds, good performance) +: "${_use_llvm_lto:=thin}" + +: "${_use_lto_suffix:=no}" +: "${_use_gcc_suffix:=yes}" +: "${_use_kcfi:=no}" +: "${_build_zfs:=no}" +: "${_build_nvidia_open:=no}" +: "${_build_r8125:=no}" +: "${_build_debug:=no}" +: "${_autofdo:=no}" +: "${_autofdo_profile_name:=}" +: "${_propeller:=no}" +: "${_propeller_profiles:=no}" + +# ATTENTION: Do not modify after this line +_is_lto_kernel() { + [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" || "$_use_llvm_lto" = "thin-dist" ]] + return $? +} + +_is_ci_build() { + [[ -n "$CI" || -n "$GITHUB_RUN_ID" ]] + return $? +} + +if _is_lto_kernel && [ "$_use_lto_suffix" = "yes" ]; then + _pkgsuffix=raveos-lto +elif ! _is_lto_kernel && [ "$_use_gcc_suffix" = "yes" ]; then + _pkgsuffix=raveos-gcc +else + _pkgsuffix=raveos +fi + +pkgbase="linux-$_pkgsuffix" +_major=7.0 +_minor=10 +pkgver=${_major}.${_minor} +_tagrel=2 +pkgrel=1 +_srcname=cachyos-${_major}.${_minor}-${_tagrel} +pkgdesc='Linux BORE + NTSYNC + Memory Optimized RaveOS Kernel based on CachyOS' +_kernver="$pkgver-$pkgrel" +_kernuname="${pkgver}-${_pkgsuffix}" +arch=('x86_64') +url="https://github.com/CachyOS/linux-cachyos" +license=('GPL-2.0-only') +options=('!strip' '!debug' '!lto') +makedepends=( + bc + binutils + cpio + gettext + glibc + libelf + libgcc + openssl + pahole + perl + python + rust + rust-bindgen + rust-src + tar + xxhash + xz + zlib + zstd +) + +_patchsource="https://raw.githubusercontent.com/cachyos/kernel-patches/master/${_major}" +_nv_ver=595.71.05 +_nv_pkg="NVIDIA-Linux-x86_64-${_nv_ver}" +_nv_open_pkg="NVIDIA-kernel-module-source-${_nv_ver}" +source=( + "https://github.com/CachyOS/linux/releases/download/${_srcname}/${_srcname}.tar.gz" + "config") + +# LLVM makedepends +if _is_lto_kernel; then + makedepends+=(clang llvm lld) + source+=("${_patchsource}/misc/dkms-clang.patch") + BUILD_FLAGS=( + CC=clang + LD=ld.lld + LLVM=1 + LLVM_IAS=1 + ) +fi + +if [[ "$_cpusched" = "rt" || "$_cpusched" = "rt-bore" ]]; then + unset _build_zfs +fi + +if [ "$_build_zfs" = "yes" ]; then + makedepends+=(git) + source+=("git+https://github.com/cachyos/zfs.git#commit=6330a45b06d20125de679aae5f63ba14082671ef") +fi + +if [ "$_build_nvidia_open" = "yes" ]; then + source+=("https://download.nvidia.com/XFree86/${_nv_open_pkg%"-$_nv_ver"}/${_nv_open_pkg}.tar.xz" + "${_patchsource}/misc/nvidia/0002-Add-IBT-support.patch" + "${_patchsource}/misc/nvidia/0003-fix-dsc-correct-RC-parameter-tables-to-match-VESA-DS.patch" + "${_patchsource}/misc/nvidia/0004-fix-dsc-use-bits_per_component-for-flatnessDetThresh.patch" + "${_patchsource}/misc/nvidia/0005-fix-dp-add-Bigscreen-Beyond-VR-headset-to-WAR-databa.patch") +fi + +if [ "$_autofdo" = "yes" ] && [ -n "$_autofdo_profile_name" ]; then + if [ -e "$_autofdo_profile_name" ]; then + source+=("$_autofdo_profile_name") + else + _die "Failed to find file ${_autofdo_profile_name}" + fi +fi + +if [ "$_propeller" = "yes" ] && [ "$_propeller_profiles" = "yes" ]; then + source+=(propeller_cc_profile.txt + propeller_ld_profile.txt) +fi + +if [ "$_build_r8125" = "yes" ]; then + source+=("git+https://github.com/aravance/r8125.git") +fi + +case "$_cpusched" in + bore|rt-bore|hardened) + source+=("${_patchsource}/sched/0001-bore-cachy.patch");;& + bmq) + source+=("${_patchsource}/sched/0001-prjc-cachy.patch");; + hardened) + source+=("${_patchsource}/misc/0001-hardened.patch");; + rt|rt-bore) + source+=("${_patchsource}/misc/0001-rt-i915.patch");; +esac + +export KBUILD_BUILD_HOST=raveos +export KBUILD_BUILD_USER="$pkgbase" +export KBUILD_BUILD_TIMESTAMP="$(date -Ru${SOURCE_DATE_EPOCH:+d @$SOURCE_DATE_EPOCH})" + +_die() { error "$@" ; exit 1; } + +prepare() { + cd "$_srcname" + + echo "Setting version..." + echo "-$pkgrel" > localversion.10-pkgrel + echo "${pkgbase#linux}" > localversion.20-pkgname + + local src + for patch in "${source[@]}"; do + patch="${patch%%::*}" + src="${patch##*/}" + src="${src%.zst}" + [[ $src = *.patch ]] || continue + echo "Applying patch $src..." + if [[ "$patch" == "${_patchsource}"/misc/nvidia/* ]]; then + patch -Np1 < "../$src" -d "${srcdir}/${_nv_open_pkg}" + else + patch -Np1 < "../$src" + fi + done + + echo "Setting config..." + cp ../config .config + + ### Select CPU optimization + if [ -n "$_processor_opt" ]; then + MARCH="${_processor_opt^^}" + case "$MARCH" in + GENERIC_V[1-4]) scripts/config -e GENERIC_CPU -d MZEN4 -d X86_NATIVE_CPU \ + --set-val X86_64_VERSION "${MARCH//GENERIC_V}";; + ZEN4) scripts/config -d GENERIC_CPU -e MZEN4 -d X86_NATIVE_CPU;; + NATIVE) scripts/config -d GENERIC_CPU -d MZEN4 -e X86_NATIVE_CPU;; + esac + else + scripts/config -d GENERIC_CPU -d MZEN4 -e X86_NATIVE_CPU + fi + + ### Selecting CachyOS config + if [ "$_cachy_config" = "yes" ]; then + echo "Enabling CachyOS config..." + scripts/config -e CACHY + fi + + ### Selecting the CPU scheduler + case "$_cpusched" in + cachyos|bore|hardened) scripts/config -e SCHED_BORE;; + bmq) scripts/config -e SCHED_ALT -e SCHED_BMQ;; + eevdf) ;; + rt) scripts/config -e PREEMPT_RT;; + rt-bore) scripts/config -e SCHED_BORE -e PREEMPT_RT;; + *) _die "The value $_cpusched is invalid. Choose the correct one again.";; + esac + + echo "Selecting ${_cpusched^^} CPU scheduler..." + + ### Enable KCFI + if [ "$_use_kcfi" = "yes" ]; then + echo "Enabling kCFI" + scripts/config -e ARCH_SUPPORTS_CFI_CLANG -e CFI_CLANG -e CFI_AUTO_DEFAULT + fi + + ### Select LLVM level + case "$_use_llvm_lto" in + thin) scripts/config -e LTO_CLANG_THIN;; + thin-dist) scripts/config -e LTO_CLANG_THIN_DIST;; + full) scripts/config -e LTO_CLANG_FULL;; + none) scripts/config -e LTO_NONE;; + *) _die "The value '$_use_llvm_lto' is invalid. Choose the correct one again.";; + esac + + echo "Selecting '$_use_llvm_lto' LLVM level..." + + if ! _is_lto_kernel; then + echo "Enabling QR Code Panic for GCC Kernels" + scripts/config --set-str DRM_PANIC_SCREEN qr_code -e DRM_PANIC_SCREEN_QR_CODE \ + --set-str DRM_PANIC_SCREEN_QR_CODE_URL https://panic.archlinux.org/panic_report# \ + --set-val CONFIG_DRM_PANIC_SCREEN_QR_VERSION 40 + fi + + ### Select tick rate + case "$_HZ_ticks" in + 100|250|500|600|750|1000) + scripts/config -d HZ_300 -e "HZ_${_HZ_ticks}" --set-val HZ "${_HZ_ticks}";; + 300) + scripts/config -e HZ_300 --set-val HZ 300;; + *) + _die "The value $_HZ_ticks is invalid. Choose the correct one again." + esac + + echo "Setting tick rate to ${_HZ_ticks}Hz..." + + ### Select performance governor + if [ "$_per_gov" = "yes" ]; then + echo "Setting performance governor..." + scripts/config -d CPU_FREQ_DEFAULT_GOV_SCHEDUTIL \ + -e CPU_FREQ_DEFAULT_GOV_PERFORMANCE + fi + + ### Select tick type + case "$_tickrate" in + periodic) scripts/config -d NO_HZ_IDLE -d NO_HZ_FULL -d NO_HZ -d NO_HZ_COMMON -e HZ_PERIODIC;; + idle) scripts/config -d HZ_PERIODIC -d NO_HZ_FULL -e NO_HZ_IDLE -e NO_HZ -e NO_HZ_COMMON;; + full) scripts/config -d HZ_PERIODIC -d NO_HZ_IDLE -d CONTEXT_TRACKING_FORCE -e NO_HZ_FULL_NODEF -e NO_HZ_FULL -e NO_HZ -e NO_HZ_COMMON -e CONTEXT_TRACKING;; + *) _die "The value '$_tickrate' is invalid. Choose the correct one again.";; + esac + + echo "Selecting '$_tickrate' tick type..." + + ### Select preempt type + if [[ "$_cpusched" != "rt" && "$_cpusched" != "rt-bore" ]]; then + case "$_preempt" in + full) scripts/config -e PREEMPT -d PREEMPT_LAZY;; + lazy) scripts/config -d PREEMPT -e PREEMPT_LAZY;; + *) _die "The value '$_preempt' is invalid. Choose the correct one again.";; + esac + echo "Selecting '$_preempt' preempt type..." + fi + + ### Enable O3 + if [ "$_cc_harder" = "yes" ]; then + echo "Enabling KBUILD_CFLAGS -O3..." + scripts/config -d CC_OPTIMIZE_FOR_PERFORMANCE \ + -e CC_OPTIMIZE_FOR_PERFORMANCE_O3 + fi + + ### CI-only stuff + if _is_ci_build; then + echo "Detected build inside CI" + scripts/config \ + -d CC_OPTIMIZE_FOR_PERFORMANCE_O3 \ + -e CC_OPTIMIZE_FOR_SIZE \ + -d DEBUG_KERNEL \ + -e DEBUG_INFO_REDUCED + fi + + ### Enable bbr3 + if [ "$_tcp_bbr3" = "yes" ]; then + echo "Disabling TCP_CONG_CUBIC..." + scripts/config -m TCP_CONG_CUBIC \ + -d DEFAULT_CUBIC \ + -e TCP_CONG_BBR \ + -e DEFAULT_BBR \ + --set-str DEFAULT_TCP_CONG bbr \ + -m NET_SCH_FQ_CODEL \ + -e NET_SCH_FQ \ + -d CONFIG_DEFAULT_FQ_CODEL \ + -e CONFIG_DEFAULT_FQ + fi + + ### Select THP - always for gaming/desktop memory performance + case "$_hugepage" in + always) scripts/config -d TRANSPARENT_HUGEPAGE_MADVISE -e TRANSPARENT_HUGEPAGE_ALWAYS;; + madvise) scripts/config -d TRANSPARENT_HUGEPAGE_ALWAYS -e TRANSPARENT_HUGEPAGE_MADVISE;; + *) _die "The value '$_hugepage' is invalid. Choose the correct one again.";; + esac + + echo "Selecting '$_hugepage' TRANSPARENT_HUGEPAGE config..." + + ### RaveOS specific: ZRAM builtin (not module) for early boot availability + echo "RaveOS: Setting ZRAM as builtin..." + scripts/config -e ZRAM + + ### RaveOS specific: NTSYNC builtin for Proton/Wine (no modprobe needed) + echo "RaveOS: Setting NTSYNC as builtin for Proton/Wine..." + scripts/config -e NTSYNC + + ### Optionally use running kernel's config + if [ "$_use_current" = "yes" ]; then + if [[ -s /proc/config.gz ]]; then + echo "Extracting config from /proc/config.gz..." + zcat /proc/config.gz > ./.config + else + warning "Your kernel was not compiled with IKPROC!" + warning "You cannot read the current config!" + warning "Aborting!" + exit + fi + fi + + ### Optionally load needed modules for the make localmodconfig + if [ "$_localmodcfg" = "yes" ]; then + if [ -e "$_localmodcfg_path" ]; then + echo "Running Steven Rostedt's make localmodconfig now" + make "${BUILD_FLAGS[@]}" LSMOD="${_localmodcfg_path}" localmodconfig + else + _die "No modprobed.db data found" + fi + fi + + ### Rewrite configuration + echo "Rewrite configuration..." + make "${BUILD_FLAGS[@]}" prepare + yes "" | make "${BUILD_FLAGS[@]}" config >/dev/null + diff -u ../config .config || : + + ### Prepared version + make -s kernelrelease > version + echo "Prepared $pkgbase version $(<version)" + + [ "$_makenconfig" = "yes" ] && make "${BUILD_FLAGS[@]}" nconfig + [ "$_makexconfig" = "yes" ] && make "${BUILD_FLAGS[@]}" xconfig + + echo "Save configuration for later reuse..." + local basedir="$(dirname "$(readlink "${srcdir}/config")")" + cat .config > "${basedir}/config-${pkgver}-${pkgrel}${pkgbase#linux}" +} + +_sign_modules() { + msg2 "Signing modules in $1" + local sign_script="${srcdir}/${_srcname}/scripts/sign-file" + local sign_key="$(grep -Po 'CONFIG_MODULE_SIG_KEY="\K[^"]*' "${srcdir}/${_srcname}/.config")" + if [[ ! "$sign_key" =~ ^/ ]]; then + sign_key="${srcdir}/${_srcname}/${sign_key}" + fi + local sign_cert="${srcdir}/${_srcname}/certs/signing_key.x509" + local hash_algo="$(grep -Po 'CONFIG_MODULE_SIG_HASH="\K[^"]*' "${srcdir}/${_srcname}/.config")" + + if [ "$_use_llvm_lto" != "none" ]; then + local strip_bin="llvm-strip" + else + local strip_bin="strip" + fi + + find "$1" -type f -name '*.ko' -print \ + -exec "${strip_bin}" --strip-debug '{}' \; \ + -exec "${sign_script}" "${hash_algo}" "${sign_key}" "${sign_cert}" '{}' \; +} + +build() { + cd "$_srcname" + make "${BUILD_FLAGS[@]}" -j"$(nproc)" all + + if ! _is_ci_build; then + make -C tools/bpf/bpftool vmlinux.h feature-clang-bpf-co-re=1 + fi + + local MODULE_FLAGS=( + KERNEL_UNAME="${_kernuname}" + IGNORE_PREEMPT_RT_PRESENCE=1 + SYSSRC="${srcdir}/${_srcname}" + SYSOUT="${srcdir}/${_srcname}" + ) + + if [ "$_build_nvidia_open" = "yes" ]; then + cd "${srcdir}/${_nv_open_pkg}" + MODULE_FLAGS+=(IGNORE_CC_MISMATCH=yes) + CFLAGS= CXXFLAGS= LDFLAGS= make "${BUILD_FLAGS[@]}" "${MODULE_FLAGS[@]}" -j"$(nproc)" modules + fi + + if [ "$_build_zfs" = "yes" ]; then + cd ${srcdir}/"zfs" + local CONFIGURE_FLAGS=() + [ "$_use_llvm_lto" != "none" ] && CONFIGURE_FLAGS+=("KERNEL_LLVM=1") + ./autogen.sh + sed -i "s|\$(uname -r)|${_kernuname}|g" configure + ./configure "${CONFIGURE_FLAGS[@]}" --prefix=/usr --sysconfdir=/etc --sbindir=/usr/bin \ + --libdir=/usr/lib --datadir=/usr/share --includedir=/usr/include \ + --with-udevdir=/lib/udev --libexecdir=/usr/lib/zfs --with-config=kernel \ + --with-linux="${srcdir}/$_srcname" + make "${BUILD_FLAGS[@]}" + fi + + if [ "$_build_r8125" = "yes" ]; then + cd "${srcdir}/r8125" + make "${BUILD_FLAGS[@]}" KERNELDIR="$srcdir/$_srcname" modules + fi +} + +_package() { + pkgdesc="The $pkgdesc kernel and modules" + depends=('coreutils' 'kmod' 'initramfs') + optdepends=('wireless-regdb: to set the correct wireless channels of your country' + 'linux-firmware: firmware images needed for some devices' + 'modprobed-db: Keeps track of EVERY kernel module that has ever been probed - useful for those of us who make localmodconfig' + 'scx-scheds: to use sched-ext schedulers') + provides=(VIRTUALBOX-GUEST-MODULES WIREGUARD-MODULE KSMBD-MODULE V4L2LOOPBACK-MODULE NTSYNC-MODULE VHBA-MODULE ADIOS-MODULE) + + cd "$_srcname" + local modulesdir="$pkgdir/usr/lib/modules/$(<version)" + + echo "Installing boot image..." + install -Dm644 "$(make -s image_name)" "$modulesdir/vmlinuz" + echo "$pkgbase" | install -Dm644 /dev/stdin "$modulesdir/pkgbase" + + echo "Installing modules..." + ZSTD_CLEVEL=19 make "${BUILD_FLAGS[@]}" INSTALL_MOD_PATH="$pkgdir/usr" INSTALL_MOD_STRIP=1 \ + DEPMOD=/doesnt/exist modules_install + + rm "$modulesdir"/build +} + +_package-headers() { + pkgdesc="Headers and scripts for building modules for the $pkgdesc kernel" + depends=(binutils glibc libelf libgcc openssl pahole xxhash zlib zstd "${pkgbase}") + provides=(LINUX-HEADERS) + + if _is_lto_kernel; then + depends+=(clang llvm lld) + fi + + cd "${_srcname}" + local builddir="$pkgdir/usr/lib/modules/$(<version)/build" + + echo "Installing build files..." + install -Dt "$builddir" -m644 .config Makefile Module.symvers System.map \ + localversion.* version vmlinux + + if ! _is_ci_build; then + install -Dt "$builddir" -m644 tools/bpf/bpftool/vmlinux.h + fi + + install -Dt "$builddir/kernel" -m644 kernel/Makefile + install -Dt "$builddir/arch/x86" -m644 arch/x86/Makefile + cp -t "$builddir" -a scripts + ln -srt "$builddir" "$builddir/scripts/gdb/vmlinux-gdb.py" + install -Dt "$builddir/tools/objtool" tools/objtool/objtool + + if [ -f tools/bpf/resolve_btfids/resolve_btfids ]; then + install -Dt "$builddir/tools/bpf/resolve_btfids" tools/bpf/resolve_btfids/resolve_btfids + fi + + echo "Installing headers..." + cp -t "$builddir" -a include + cp -t "$builddir/arch/x86" -a arch/x86/include + install -Dt "$builddir/arch/x86/kernel" -m644 arch/x86/kernel/asm-offsets.s + install -Dt "$builddir/drivers/md" -m644 drivers/md/*.h + install -Dt "$builddir/net/mac80211" -m644 net/mac80211/*.h + install -Dt "$builddir/drivers/media/i2c" -m644 drivers/media/i2c/msp3400-driver.h + install -Dt "$builddir/drivers/media/usb/dvb-usb" -m644 drivers/media/usb/dvb-usb/*.h + install -Dt "$builddir/drivers/media/dvb-frontends" -m644 drivers/media/dvb-frontends/*.h + install -Dt "$builddir/drivers/media/tuners" -m644 drivers/media/tuners/*.h + install -Dt "$builddir/drivers/iio/common/hid-sensors" -m644 drivers/iio/common/hid-sensors/*.h + + echo "Installing KConfig files..." + find . -name 'Kconfig*' -exec install -Dm644 {} "$builddir/{}" \; + + if compgen -G "rust/*.rmeta" 1>/dev/null; then + install -Dt "$builddir/rust" -m644 rust/*.rmeta + fi + if compgen -G "rust/*.so" 1>/dev/null; then + install -Dt "$builddir/rust" rust/*.so + fi + + echo "Installing unstripped VDSO..." + make INSTALL_MOD_PATH="$pkgdir/usr" vdso_install link= + + echo "Removing unneeded architectures..." + local arch + for arch in "$builddir"/arch/*/; do + [[ $arch = */x86/ ]] && continue + echo "Removing $(basename "$arch")" + rm -r "$arch" + done + + echo "Removing documentation..." + rm -r "$builddir/Documentation" + + echo "Removing broken symlinks..." + find -L "$builddir" -type l -printf 'Removing %P\n' -delete + + echo "Removing loose objects..." + find "$builddir" -type f -name '*.o' -printf 'Removing %P\n' -delete + + echo "Stripping build tools..." + local file + while read -rd '' file; do + case "$(file -Sib "$file")" in + application/x-sharedlib\;*) strip -v $STRIP_SHARED "$file" ;; + application/x-archive\;*) strip -v $STRIP_STATIC "$file" ;; + application/x-executable\;*) strip -v $STRIP_BINARIES "$file" ;; + application/x-pie-executable\;*) strip -v $STRIP_SHARED "$file" ;; + esac + done < <(find "$builddir" -type f -perm -u+x ! -name vmlinux -print0) + + echo "Stripping vmlinux..." + strip -v $STRIP_STATIC "$builddir/vmlinux" + + echo "Adding symlink..." + mkdir -p "$pkgdir/usr/src" + ln -sr "$builddir" "$pkgdir/usr/src/$pkgbase" +} + +_package-dbg(){ + pkgdesc="Non-stripped vmlinux file for the $pkgdesc kernel" + depends=("${pkgbase}-headers") + + cd "${_srcname}" + mkdir -p "$pkgdir/usr/src/debug/${pkgbase}" + install -Dt "$pkgdir/usr/src/debug/${pkgbase}" -m644 vmlinux +} + +pkgname=("$pkgbase") +[ "$_build_debug" = "yes" ] && pkgname+=("$pkgbase-dbg") +pkgname+=("$pkgbase-headers") +[ "$_build_zfs" = "yes" ] && pkgname+=("$pkgbase-zfs") +[ "$_build_nvidia_open" = "yes" ] && pkgname+=("$pkgbase-nvidia-open") +[ "$_build_r8125" = "yes" ] && pkgname+=("$pkgbase-r8125") +for _p in "${pkgname[@]}"; do + eval "package_$_p() { + $(declare -f "_package${_p#$pkgbase}") + _package${_p#$pkgbase} + }" +done + +b2sums=('SKIP' + 'SKIP' + 'SKIP') |